*お取り寄せ可能【 TacoVinyl 】 2019-2020 Rav4 Grille
his is the first aftermarket grille made for the Toyota Rav4. Its a sleek aluminum grille that clips into the factory bumper that changes the look of the vehicle entirely. Moderate install difficulty. Install video link will be added to the end of the description.
The grille comes in two pieces. Both pieces are made of aluminum to cut weight, allow for some degree of flexibility and the no rust factor. The first is a mounting frame that clips onto the factory bumper. There are several slots that will be pressed and clipped into place so that the main face of the grille can be mounted to it. The main grille then allows 18 bolts to pass through it to mount to the frame. Between the two aluminum pieces, rubber spacers will be added to prevent rubbing and allow the grille to be pushed into a more aesthetic position. The bolts will go through the main piece, the spacer will be added and then the bolt will tighten into a premounted nut on the surface of the frame part of the grille.
The last part is six bolts that hold the factory plastic piece of the upper bumper into place like the stock grille. Once the last six bolts are fastened the grille install is complete and the bumper is ready to go back onto the Rav4.
The two aluminum sections of the grille are powder-coated semigloss for protection and the hardware is all stainless steel.
トヨタRav4のために作られた最初のアフターマーケットグリルです。
純正バンパーにクリップで装着するだけで、車の外観を一変させてくれる洗練されたアルミ製グリルです。
グリルは2つのパーツで構成されています。
どちらのピースもアルミ製で、軽量化とある程度の柔軟性、そして錆びないことを目的としています。
1つ目は、純正バンパーにクリップで固定するマウントフレームです。
グリルのメインフェイスが取り付けられるように、いくつかのスロットがあり、それをプレスして所定の場所にクリップします。
そしてメイングリルは、フレームに取り付けるために18本のボルトを通すことができます。2つのアルミピースの間にはゴム製のスペーサーを入れ、こすれを防ぎ、グリルをより美しい位置に押し込むことができるようにします。ボルトはメインピースを通し、スペーサーを追加し、グリルのフレーム部分の表面にあらかじめ取り付けられているナットにボルトを締め込みます。
最後は純正グリルのようにアッパーバンパーの純正樹脂ピースを固定するボルト6本です。最後の6本のボルトを締めれば、グリルの取り付けは完了。
グリルの2箇所のアルミ部分にはパウダーコーティングを施し、保護のためにセミグロス塗装を施しています。
【お読みください】
*弊社で商品の検品を行いご用意させていただきますが、輸入品のため輸送時に伴うスレや傷が多少ある場合がございますので予めご了承くださいませ。
*11月下旬から12月上旬発送となります。